A few years back, we decided we had too many benches in our shop, so I hired movers to transport and get my “Gluebo” into my basement. (Its weight almost killed us moving it from my former workplace to Lost Art Press in 2017.)
Then we decided we had too few benches, and that we should have a commercial bench on site so that we could try it out and perhaps recommend it to those who didn’t want to (or have time to) make their own bench. (And OK… we did the math, and realized our time was better spent on editing and things other than making a new bench.) So we asked Benchcrafted to make me a 30″-tall version of the 84″-long “Classic” (the standard height is 34″). At 5’6″ (OK…I’m a little shorter these days), 34″ is too high for me to comfortably plane atop for long periods of time – and I spend a fair amount of time at the bench. So I was happy that Benchcrafted agreed.
And it is an excellent bench; we do recommend it – though I wish it were about 2″ wider. (It would be easy to add a piece of maple to the back edge…I just haven’t done it.)
Now we need to move a bench over to our new storefront, so folks have one handy on which to try out Crucible tools (and so that we have one on site for photography). Kale is a couple inches shorter than am I…and I must have had on Birkenstocks the day we measured for that bench height. In my work boots (which I wear about 10 months out of the year), 31″ is a better height. So Kale is taking my Classic, and we have once again begged Benchcrafted to make a custom-height bench for me. We’re moving Kale’s current bench, the Holtzapffel, to the Anthe building
This time, we’re getting the Split-top Roubo, because people ask about it a lot. And having worked on one for only a couple weeks on and off while teaching at the Florida School of woodworking, I don’t have an informed decision about it. So I’m about to find out.
It’s easier for Benchcrafted to do a run of benches at one time – and they don’t typically do custom. So if anyone else needs a 31″-high bench, get your Split-top Order in ASAP (I’d say by no later than Dec. 11), and send the Benchcrafted guys a note immediately afterword stating that you want the shorter height.
– Fitz
p.s. How do you know the right bench height? The way we figure it is to stand straight and let your arm hang down loosely by your side. Have someone measure the distance from the knuckle joint on your dominant hand’s pinky to the floor. That’s the ideal height for the top of your bench, if you do a lot of handplaning with metal planes; those who use wooden-stock planes might prefer a slightly shorter bench. To raise things to a comfortable height for sawing, I use a twin-screw vise.
p.p.s. We also plan to film a video in 2025 on making the Anarchist’s Workbench at 31″ tall. That one will likely become my bench (unless I fall in love with the split top), then I’ll take home my “petite Roubo” that found its way over here when we were still a bench short. I miss having that one at home. It is white pine – no need to hire movers (which is why we brought it here instead of bringing back the Gluebo). Then we’ll have enough benches for all our classes, and at various heights so that we can more easily match them up to people. Plus, lots of different styles so that folks can try out the different “models.”
